---

THE JOURNAL PUBLISHES SUBMISSIONS IN FOUR CATEGORIES

I. RESEARCH ARTICLES

II. BOOK REVIEWS

III. ANNOUNCEMENTS

IV. NOTES AND COMMENTS

 

 

DIFFERENT FORMATS AND REQUIREMENTS OBTAIN FOR EACH CATEGORY

 

 

I. RESEARCH ARTICLES

 

 

MANUSCRIPT:

For the initial submission of manuscripts for consideration submit it via e-mail to: kre@airtelmail.in 

The manuscripts are categorised under three types

-           Regular Articles

-           Short Communications

-           Reviews

Prepare the manuscript as per style of the Journal. Manuscripts which do not fully confirm to Journal style will be returned to the Authors.

 

MANUSCRIPT SHOULD CONSIST OF THE FOLLOWING SUBDIVISIONS (1-10):

1. Title Page, 2. Key words, 3. Abstract, 4. Text, 5. Acknowledgement (if any), 6. Footnotes, 7. References, 8. Tables, 9. Figures/Illustrations, 10. Appendix (if any), 11. Metric System, 12. Symbols.

 

1. TITLE PAGE:

The Title Page Must Contain:

-           Title

-           Author’s Name (or Names)

-           Institution from which the paper emanated, with City, State, Country, Postal code, and E-mail Address

-           Number of Text Pages, plus References, Figures, Graphs, Charts, and Tables

-           Abbreviated Title (Running Headline) not to exceed 50 letters and spaces

-           Name, Address, Telephone Number, Fax Number, and E-mail Address of the Person to whom all the correspondence

            is to be addressed.

 

2. KEY WORDS:

Key words should be included, should not repeat terms used in the article title, and should not exceed 80 characters and spaces.

 

3. ABSTRACT:

The abstract should consist of 100-150 words or less. The abstract should be written in complete sentences and should succinctly state the objectives, the experimental design of the paper, and the principal observations and conclusions; it should be intelligible without reference to the rest of the paper.

 

4. TEXT:

-           Do not divide words at the ends of lines; if they are unfamiliar to the printer, they may be incorrectly hyphenated.

-           Do not begin sentences with abbreviations.

-           The word ‘Figure” is not abbreviated in the text, except when it appears in parentheses: (Fig. 2)   (Figs. 4-6).

-           The spelling of nontechnical terms should be that recommended in the current Webster’s International Dictionary.

-           Always spell out numbers when they stand as the first word in a sentence; do not follow such numbers with abbreviations.

            Numbers indicating time, weight, and measurements are to be in Arabic numerals when followed by abbreviations (e.g., 5 mm;

            4 sec; 9 ml)

-           Use italic font for text that is to be italicized.

 

5. ACKNOWLEDGEMENT (IF ANY):

The acknowledgement should be written in complete sentences.

 

6. FOOTNOTES:

Footnote text should be placed as Endnotes before the List of references.

Footnotes to a table should be typed directly beneath the table and numbered with superscripts.

 

7. REFERENCES:

References in the Text: References citations in the text should be in parentheses and include author name(s) and year of publication. Text citations of two or more works at the time should be given in chronological order. When citing a paper written by three or more authors, write the name of the first author plus “et al.” (However, all authors must be given in the Reference section). Where there are two or more papers by the same author in one year, distinguishing letter (a, b, c....) should be added to year. All references should be carefully cross-checked; it is the author’s responsibility to ensure that references are correct.

 

Examples:

 

In the text, references to the literature should be cited by author’s surname followed by year of publication:

 

    ………studies by Bhasin (1992) reveal………………

    ………studies by Behera and Patel (1997) reveal……….

    ………studies by Bhasin et al. (1991) reveal ……………..

    ………an earlier report (Howard 1946) ……………..

 

 When more than one author is cited, the listing should be first alphabetical by name and then chronological by date:

 

             ……...earlier reports (Bhasin et al. 1992, 1993; Weil 1997)………

 

When references are made to more than one paper by the same author, published in the same year, they should be designated in the text as (Bhasin, 1996a, b)

 

Bhasin Veena 1996a. Caste Dynamics in a Transhumant Society. J Hum Ecol, 7(2): 77-94.

Bhasin Veena 1996b. Changpas - The Transhumants of Ladakh. J Hum Ecol, 7(4): 225-264.

 

References should be listed at the end of article, arranged alphabetically according to the surnames of the authors and in chronologically. Following are examples of the proper reference style of various sources:

 

Journals:

Ali F, Parikh A, Shah MK 1994. Measurement of profit efficiency using behavioural and stochastic frontier approaches. Applied Economic, 26:181-88.

 

Books:

Beautement V, King S, Pilbeam E, Reynolds M 2005. Economics: Teacher’s Book. Cape Town: Oxford University Press.

 

Sections of Books:

Munslow B, Fitzgerald P, McLennan A 1999. Sustainable development: visions and realities. In: P Fitzgerald, A McLennan, B Munslow (Eds.): Managing Sustainable Development in South Africa. Oxford: Oxford University Press, pp. 2-37.

 

Newspaper / Magazine:

Bhasin Veena 1982. Ecology and Gaddi Culture. Hindustan Times, Weekly, August 29, 1982, P. 9.

 

Radio/Television Talk:

Bhasin Veena 1986. Radio Talk - Gaddis of Himachal Pradesh. All India Radio ‘Yuv Vani’ - 1st July, 1986.

 

Meeting Paper:

Espein G 2005. An Alternative to Inflation Targeting Monetary Policy for Stable and Egalitarian Growth: A Brief Research Summary.  A Paper at WIDER Jubilee, WIDER Thinking Ahead: The future of Development Economics, Helsinki, Finland, June 17-18.

 

Report:

Confederation of Indian Industry (CII) 2001. E-commerce in India: How to Make It Happen? Report of the CII National Committee on E-Commerce 2000-2001. Chennai: Confederation of Indian Industry.

 

Thesis / Dissertation:

Adeyeye VA 1986. Relative Economic Efficiencies in Farm Organization: A Comparable Study of Cooperative and Non- cooperative Farms in Oyo and Kwara State, Nigeria.  Ph.D Thesis, Unpublished, Ibadan: University of Ibadan.

 

Work “in press”:

Hiralal Kalpana 2009.  The “invisible” workers of the informal economy – A case study of home-based workers in Kwazulu/Natal, South Africa. J Soc Sci, (in press).

 

Website:

Tipple Graham 2004. Settlement Upgrading and Home-Based Enterprises: Discussions from Empirical Data. From <.http://www.sciencedirect.com/science> (Retrieved on 16 October 2007)

 

When there are more than three authors used et al. in place of rest of the authors.

 

The References list must be arranged alphabetically by Author’s or Authors’ Surname(s) and chronologically for each author, in the following style:

 

Author’s Name (or Names), Year of Publication, Complete Title, Volume, and inclusive Pages as follows:

 

Adeyeye VA 1986. Relative Economic Efficiencies in Farm Organization: A Comparable Study of Cooperative and Non- cooperative Farms in Oyo and Kwara State, Nigeria.  Ph.D Thesis, Unpublished. Ibadan:  University of Ibadan.

 

Ali F, Parikh A, Shah MK 1994. Measurement of profit efficiency using behavioural and stochastic frontier approaches. Applied Economic, 26:181-88.

 

Beautement V, King S, Pilbeam E, Reynolds M 2005. Economics: Teacher’s Book. Cape Town: Oxford University Press.

 

Bhasin Veena 1982. Ecology and Gaddi Culture. Hindustan Times, Weekly, August 29, 1982, P.9.

 

Bhasin Veena 1986. Radio Talk - Gaddis of Himachal Pradesh. All India Radio ‘Yuv Vani’ - 1st July, 1986.

 

Confederation of Indian Industry (CII) 2001. E-commerce in India: How to Make It Happen? Report of the CII National Committee on E-Commerce 2000-2001. Chennai: Confederation of Indian Industry.

 

Espein G 2005. An Alternative to Inflation Targeting Monetary Policy for Stable and Egalitarian Growth: A Brief Research Summary.  A Paper at WIDER Jubilee, WIDER Thinking Ahead: The future of Development Economics, Helsinki, Finland, June 17-18.

 

Hiralal Kalpana 2009.  The “invisible” workers of the informal economy – A case study of home-based workers in Kwazulu/Natal, South Africa. J Soc Sci, (in press).

 

Munslow B, Fitzgerald P, McLennan A 1999. Sustainable development: visions and realities. In: P Fitzgerald, A McLennan, B Munslow (Eds.): Managing Sustainable Development in South Africa. Oxford: Oxford University Press, pp. 2-37.

 

Tipple Graham 2004. Settlement Upgrading and Home-Based Enterprises: Discussions from Empirical Data. From <http://www.sciencedirect.com/science> (Retrieved on 16 October 2007).

 

8. TABLES:

-           All tables must be cited in the text. They should be numbered consecutively with Arabic numerals. Table

            titles should be complete but brief. Information other than that defining the data should be presented

            in footnotes, not in the table heading.

-           Give number to each table in the paper. Start the number from one onwards and use numbers in Arabic (1, 2, 3…)

-           Table titles should be complete

-           Table  should either in the end after the references or after the text of the table

-           Don’t use above/below in the text for the table

-           Write all percentages in one decimal place in all the Tables in the text (for example 25.3 or 25.33)

-           Do not submit any scan table with the paper (send only Typed Tables)

-           All the tables must be in black & white and without any background

-           While the Tables clearly present the data, it is unnecessary to adopt whole questionnaire items as description

            for variables. The authors may wish to abbreviate the variables in smaller sentences that convey the same meaning

-           In percentage column always use at least one digit after dot (for example 25.3 or 25.33)

-           All the tables must be prepared as per format of the journal.

-           Use Microsoft tool to draw yours Table and cite it in the text

 

9.  FIGURES/ILLUSTRATIONS:

-           Give number to each figure in the paper. Start the number from one onwards and use numbers in Arabic (1, 2, 3…)

-           Figure title should be complete

-           All the figures must be cited in the text.

-           Figure should either in the end after the references or after the text of the figure

-           Don’t use above/below in the text for the figure

-           Delete the figure if table is there for that observations.

-           Delete the figures and give the data in the form of tables for research paper. The figures in the paper will be more

            suitable while presenting the findings in  a seminar/conference, but not in the printed form

-           All the figures must be in black and white only (without any background).

-           Fill the bars or/and circles with dots and line only but not in light and dark shade

-           Figure/s in line drawing and lettering on them must be clear and concise

-           Check lettering and labels should be large enough to allow for suitable reduction and readable after reduction.

-           Send the figure in JPG form only separately (not in MSWORD format of in PDF) for final processing

-           Permission to publish photograph of a subject:

-           Include the copy of the consent of the parents of the subject which permits the authors to publish the photograph of

            the subject, and also cover both the eyes and also nose bridge to make the figure appear better. 

 

10. APPENDIX (IF ANY):

The Appendix should be avoided if possible.

 

11. METRIC SYSTEM

The metric system should be used for all measurements, weight, etc. Temperatures should always be expressed in degrees Celsius (centigrade). Metric abbreviations, as listed below, should be expressed in lower-case without periods.

Length: km (kilometer); m (meter); cm (centimeter); mm (millimeter); μm (micrometer) (micron); nm (nanometer); pm (picometer); Å (Ångstrom unit) (10Å=1 nm).

Area: km² (square kilometer);  m² (square meter), mm² (square centimeter); nm² (square millimeter); μm² (square micrometer); nm²(square nanometer); km³ (cubic kilometer); m³ (cubic meter); cm³ (cubic centimeter); mm³ (cubic millimeter); μm³ (cubic micrometer); nm³ (cubic nanometer). Volume: kl (kiloliter); liter (always spell out); ml (milliliter); μl (microliter); nl (nanoliter); pl (picoliter).

Weight: kg (kilogram); gm (gram); mg (milligram); μg (microgram); ng (nanogram); pg (picogram).

 

12. SYMBOLS:

When proceeded by a digit, the following symbols are to used: % percent; º for degree.

  

13. SIZE:

An article should not generally exceed twelve printed pages (18 double spaced typed pages of MS Word). The authors would be charged for additional pages, even if a longer article is accepted for publication.  Reporting of frequency data may be accepted in the form of small report. Such reports should generally not exceed four pages, including tables/figures.

 

14. SCREENING OF THE PAPER:

Each paper is screened (not reviewed) by the Member of the Editorial Board to check its suitability for favour of publication in thePeer-reviewed Scientific and Research international journal. If it is observed that it can be considered for publication than the Corresponding Author is asked to complete the initial formalities.

 

15. REFEREES FOR REVIEW OF PAPER:

The authors are also requested to provide the contact details of at least three potential peer reviewers/ list of Referees for the paper who may be asked to review the paper with the instructions that the Referees’ present status must be either Associate Professor/Reader or Professor (University/Institute) in the field of specialisation as the subject of the paper demands to whom we may request for review of the paper and the Referees should be other than the Members of Editorial Board of the Journal, who are known to the authors and aware of the research activities of their Department/Institute, but are not from their Department/Institute). They should be experts in the field of study, who will be able to provide an objective assessment of the manuscript’s quality. The paper may also be sent to others for review in addition to the list of Referees provided by the corresponding author.

Please provide the following information about the Referees:

·         Full Name:

·         Present Status:

·         Field of Specialisation:

·         Name and Address of Institute/Department/University:

·         Postal Address:

·         E-mail (It is must):

 

16. PEER REVIEWERS:

Paper is sent to the three Referees (who are specialized in the field of the topic of Research Paper) with the Referees’ Report Form for providing his/her comments in that form (BLIND REVIEW). The Referees are requested to provide their comments within six to eight week time period.

 

17. PLAGIARISM CHECK: 

Paper will be checked for Plagiarism.

 

19. ACCEPTED PAPER:  

Acceptance of paper will be acknowledged via e-mail.

 

20. AUTHORISATION AND DECLARATION:

Authors must accept full responsibility for the content of their articles. The Members of the Editorial Board and the Publisher of the journal are not responsible for the statements and opinions expressed by the authors in their articles/write-up published in the journal. While submitting the paper the author (s) must give a declaration that “the article has not been published or sent for publication elsewhere”.

 

II. BOOK REVIEWS

 

Book Reviews are solicited by the Editor/Managing Editor. Unsolicited reviews will not ordinarily be considered for publication. A book review should begin by stating the Title, Author(s), Publisher, Date, Page Count, Price, and ISBN Number of the work reviewed:

 

The review should include no other front matter (title, abstract, key words) headings, tables or illustrations. Bibliographical citations should be avoided if possible. The reviewer’s name and address should be placed at end of the review.

 

III. ANNOUNCEMENTS

 

 

Announcements of general interest may be published without charge at the discretion of the Editor and Publisher. Submissions should consist of text only and be submitted exactly as they are to appear in print. Announcements concerning goods and services offered for sale will not be published gratis and must be submitted as advertising copy (For detail information write to the Publisher).

 

IV. NOTES AND COMMENTS

 

The Notes and Comments section is reserved for short articles of general interest and responses to previously published items. Three categories of items are included in the Notes and Comments section:

 

1. Technical Notes, 2. Brief Communications, 3. Letters to the Editor

 

1. Technical Notes:  These are very short, Methodological Articles

 

2. Brief Communication: It reports the outcome of a very small, problem-based study

Papers submitted as a Technical Note or Brief Communication should not ordinarily exceed 8 pages, including the Cover Page and References cited section. Tables, Figures, and References cited should be minimized.

 

3. Letters to the Editor: A letter should be of general interest or a response to a previously published item. Letters normally should not be longer than 1500 words, and figures, tables, and literature cited should be avoided. An author on whose article the letter writer is commenting will be given an opportunity to read the letter, and to respond. If the two letters are acceptable, the reply is published immediately after the original letter, preferably in the same issue of the journal.

 

In all other respects, submissions under these three headings should follow the rules governing the preparation of copy and illustrations for research articles.

 

OTHER INFORMATION

 

The Publisher reserves copyright of the article published in the journal. 

          

Proof: Galley proofs will be sent to the corresponding author for correction of typographical errors only; alterations other than correction of printer errors will be charged to the author. All corrections should be marked clearly, directly on page proofs.

 

Reprints: Reprints of research articles and publications in Notes and Comments can be purchased at prices quoted on the reprint order form. The order, along with payment, for reprints etc. should be sent with the corrected proofs. No free reprints are supplied, but any number in excess of 100, with or without covers may be purchased. It is important to order initially sufficient quantity of reprints, since the price is substantially higher if they are ordered after the paper has been published. Reprints of announcements and book reviews are also available.